Skip to content
Choosing The Best Finish For Your Prints.
What’s The Best Finish For Prints? Lamination or UV Varnish?
Printing “finishes” such as lamination and Spot UV varnishes are used to increase both the perceived value and quality of a printed item (such as a brochure, folder or data sheet) and also provide ink-protection.
Depending on the desired result and project budget, each of the print finishes has it’s own pros and cons and in any print situation the suitability of a laminate or varnish needs to be considered carefully. Let’s look at these two main print finishing (Lamination and varnish) in more detail.
This is the process of using an ultra thin plastic film which can be applied to almost any paper or board and is more commonly used in gloss, silk and matt finishes. A lamination will cover the whole side or sides of a document and cannot be used to cover a specific area alone.
Can be used to enhance the appearance of standard paper boards at relatively low cost and is generally cheaper than a spot uv varnish in most cases.
Will make a paper more durable and long lasting and can actually offer some water/grease resistance
Can only be used to cover a whole side of a document.
Matt lamination over a dark colour will show finger prints, more so than gloss
UV (ultra violet) Varnish
This is a liquid coating used to ‘mask off’ any area of a design and enhance it (ie. varnishing text, logos or images whilst leaving the remainder of the page unaffected). Unlike a lamination, UV varnishes come in an array of finishes and not only include gloss and matt but also glitter and colour-flip versions as well as many others.
UV Varnish Pros:
Can be used to enhance specific areas such as text, logos or images rather than cover a whole page.
Additional substances can be added to varnish to increases its versatility such as glitter.
Can be used in conjunction with a laminate and printed over the top to create a more creative and diverse result
UV Varnish Cons:
Relatively a more expensive finish.
Due to additional set up required, uv varnishing is a much longer process than lamination or indeed other finishing.
A neutral Varnish (which is invisible to the eye) may also be used to ‘coat’ or ‘seal’ the ink and can be applied ‘online’ (the varnish is applied directly to the product on the press after the ink has been printed) or ‘offline’ which means it is applied some time after the print process. This is not the same as a Spot UV Varnish will generally cover the whole of a document to prevent ink offset.
In conclusion, many factors will determine whether a lamination or varnish is best used for your print job such as budget, usage, and the impression you ultimately intend to create. Just in case you require further advise in choosing the right finishing for your prints, consult a professional printer or better still contact us at Print Magic and we will be more than happy to offer advice and expertise (email@example.com/08098279561).